|
Description: |
Requirements: |
Quantity
Needed: |
|
End Posts |
1 for each end, corner,
gate, in high and low places & in the middle of long spans .(Use
nominal 4” x 4” if planning on covering w/sleeves) |
|
|
Line Posts |
Install on 8’ to 16’ centers. |
|
|
Polytape |
Available in 200’ & 825’ spools. |
|
|
Tensioners |
R-40 for end & gate posts(2 per package) |
|
|
|
R-50 for corners & tape gates(2 per package) |
|
|
|
R-55 for cross fences(2 per package) |
|
|
Insulators |
R-16 for wood or vinyl posts(25 per bag) |
|
|
|
TP-25 for T posts (25 per bag) |
|
|
Screws |
2 for each R-16 Insulator use W-16 for wood posts orS-16 for
Safe-Tee Sleeves. |
|
|
Splicer Buckles |
For splicing rolls of polytape or repairing tape cuts. (4 per
package) |
|
|
R-79 Wire Connectors |
Two for each tensioner(4 per package) |
|
|
R-12 Gate Handle Or R-22 Gate Kit |
One for each strand on each tape gate. |
|
|
R-28 Insulated Cable |
Enough for all connections from fence charger to fence and ground
rods, between tensioners, under gates, etc. |
|
|
Fence Charger |
1 for each fence, rated by acreage |
|
|
Ground Rod Kit |
1 for each fence charger |
|
|
Concrete Mix |
1 bag for every two post holes. |
|
|
Gravel |
Enough to put 6” in each post hole. |
|
