R-40 End Tensioner |
Begin
and end each strand with a R-40 at gate posts or buildings. Holds
webbing tight and allows easy retightening. |
R-50 Corner Tensioner |
Use
the R-50 at all corners or any up and down hill direction change greater
than 10 degrees. Also used at tape gates |
R-55 Tee Tensioner |
The
R-55 has three tensioners. Use for cross fence junctions |
 
R-24 Splicer |
A
stainless steel spring buckle similar to the tensioner. Used to join
rolls of webbing or repair torn webbing in minutes. |
